SAVA 7

Sava 7

Audio Power Specifications

Power Output and Total Harmonic Distortion:

For center and front full range speakers: With 8 ohm loads, both channels driven,

from 70Hz – 20kHz: rated at 8 watts per channel minimum RMS power, with no more than

0.9% THD from 250 milliwatts to rated output.

Amplifier Section:

Continuous RMS Power output – Total 80W

Center   – 13W (8 ohms at 1 kHz, 9% THD)

Front  – 13W + 13W (8 ohms at 1 kHz, 9% THD)

Super Woofer – 28W (8 ohms at 60 Hz, 9% THD)

Surround – 13 W (8 ohms at 1kHz, 9% THD)

Input Sensitivity/Impedance –  450mV, 25kohms

Output – To TV – 450mV

External Center – accecpts 8-16 ohms speaker

External Surround – accecpts 4-8 ohms speaker

Tone Control – Front – Bass:±10dB at 100Hz, Treble:±10dB at 10kHz

Speaker Section

Type

Front – Closed type

Center – Closed type

Super Woofer – ABR type

Surround – Closed type

Speaker Unit

Center speaker: 7cm cone type (x2)

Front speaker: 8cm cone type (x2)

Super woofer: 10cm cone type (x2)

Surround speaker: 7cm cone type(x2)

General

Power Requirement

U.S.A., Canada, and Central south America: 120V AC, 60Hz

Other Models: 220-230V AC, 50/60Hz

Power Consumption – 55W

Dimensions

Left:

Approx. 125 x 420 x 275mm (w/h/d) (5 x 16 5/8 x 10 7/8 inches)

Right:

Approx. 125 x 420 x 275mm (w/h/d) (5 x 16 5/8 x 10 7/8 inches)

Mass

Front speaker (L): 4.5kg (9lb 15oz)

Front speaker (R): 5.5kg (12lb 2oz)

Supplied accessories

Front L/R Speaker Connection cord, 2m (1)

Audio Connecting cord, 1.5m (1)

Black: 2-pin x 2-pin

White: 2-pin x stereo mini

Remote commander RM-J7 (1)

Sony SUM-3 (NS) batteries (2)

Advertisements

18 thoughts on “SAVA 7

    • Thanks, but I found a white pair. Looking for a black set. I am selling my white one is anyone is interested. $75+Shipping. Thanks.

  1. I’m looking for the replacement set of feet for the Sava 7 speaker system.

    I just got a set of black sava 7’s today but to my dismay the left tower is missing it’s little kick out stand.

    If anyone know’s anything about this part I’d thankful if you could let me know.

    As far as i know there is nothing diffident from the white to the black when it comes to this part.

    Zax1108@aol.com

    • I had the same problem – it is related to the multicore cable connector. Without the aid of a multimeter or technician here in Brunei my best and most reliable solution has been to re-seat the cable in either speaker. A little hit and miss but with enough wiggling you can stop that annoying sound (sounds like a car turn indicator right?)

  2. Got a Sony Sava-7 series (color white) from a friend of the family , that still work …some condition issues from age(missing rubber pads). i am in need of a copy of the owners manual if anybody has it in english (Adobe PDF File). Can’t afford to purchase one from ebay.com …It is not avialable from Sony.com

  3. Hello, Anyone has the cord for a SAVA7 ? there is a clicking sound and will not start,.Please reply and let me know if anybody as the cables
    Thanks

  4. I have a pair of Sava 7’s that I’ve had since I was in middle school. The last time I used them a few years ago, they were still in working order. Now, even though they power on like usual, there is absolutely no audio, even the test tone cannot be heard. I disassembled the units, but didn’t find any obvious capacitor or fuse issues. Anyone have insight as to how I can resolve this?

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s